Previous construction of one unit 11.8M Aluminum Power Catamaran for a resort on Pumpkin Island, Queensland, Australia. This ferry had a forward boarding ramp and passenger access to the upper deck.
Specification:
Length OA 11.80M, Beam 4.40M, Depth 1.30M, Displacement per design.
- Marine grade [5083 H116 Mill Finish DNV Cert] aluminum hull, deck and full cabin superstructure from CNC kitset. Hull bottom thickness 6mm, sides 4mm, superstructure 4mm.
- Transoms to suit outboard horsepower up to 350HP.
- Heavy duty wear plates to fore foot.
- 6 x zinc anodes.
- Bow storage area with access through hatch in foredeck.
- Step/ladder access to roof/luggage storage.
- Non-skid paint to foredeck and side decks.
- Non-skid rubber mat fitted throughout.
- Interior headlining and cabin sides, Formica finish.
- Roll-up side curtains/clears fitted to aft cockpit area both sides per design.
- Marine grade waterproof aluminum windows, 2 x side sliding opening, remainder fixed.
- Aluminum or 316L stainless steel guardrail to foredeck and cabin roof. Cabin roof rail to be removable for shipping.
- 6 x 10” aluminum cleats.
- Aluminum or stainless steel bollard on foredeck.
- 2 x Yamaha F300 4-stroke outboards, counter-rotating, ultra-long leg [30”].
- Outboard controls standard Yamaha supply plus single binnacle fly-by-wire and dual key switches.
- Hydraulic steering – Hydrive bullhorn type with hydraulic link, helm pump, piping and steering wheel installed.
- Cushioned side bench seating for 20 pax and forward facing seats for 12 pax in aft cabin. Cushioned bench seating in bow area per design.
- Shelving under seats in aft cabin for dry goods.
- Helm seat with bolster.
- Anchor windlass 12VDC, anchor roller on bow sprit, anchor line all chain – length TBA.
- Heavy duty windscreen wiper.
- Electrical panel 12VDC, 16 breaker and wiring, dual 12V charging sockets.
- Battery 3 way switch panel, service, engine, parallel.
- Battery boxes for engine start x 2.
- Battery boxes for service batteries x 2.
- Batteries standard heavy duty, local supply
- Navigation lights LED, USCG standard.
- Interior lighting LED x 2 above wheelhouse console, 6 in headlining over cockpit, 1 in forward storage area.
- 1 x remote manually operated spotlight over helm position, 2 x fixed spotlights aft on cabin roof.
- Headlights at bow.
- Horn 12VDC.
- 4 x 2000 gph bilge pumps.
- 2 x manual bilge pumps.
- Jabsco fresh water pump, cold water.
- Freshwater 200 litres
- Single 12VDC toilet, hand basin in head.
- Black water tank 100 litres, manual pump with deck connection for pump-out to dock.
- Fuel 2 x 500 litres.
- Fuel filters/water separator – Yamaha supply.
- Removable dive tank storage racks under cockpit deck in each hull.
- Dinghy rack to suit 3M RIB fitted to aft platform.
- Manual davit, capacity 250kg per design.
- Fitting in aft cockpit area deck for removable table.
- Jotun epoxy primer and anti-fouling applied to hull underwater area.
- Standard USCG safety equipment to include 3 x 1.5kg fire extinguishers, 4 x 12 person Karly floats, 2 x life rings, 40 x PFD Type 1 life jackets.
